保質保量的自動焊 接機設備價位并不便宜，為了保證其長期穩定工作，提高焊 接件的品質，在日常中要對焊 接設備進行有序保養，如果有條件可以設置專門的保養人員，定期查看自動焊 接機設備的工作情況，比如是否有過大噪音，在工作過程當中是否有明顯的震動或者工件品質是否出現了下滑。
The price of automatic welding machine with quality and quantity guarantee is not cheap. In order to ensure its long-term stable work and improve the quality of welding parts, the welding equipment should be maintained orderly in daily life. If possible, special maintenance personnel can be set up to check the automatic welding regularly The working condition of the pick-up equipment, such as whether there is too much noise, whether there is obvious vibration in the working process, or whether the quality of the workpiece has declined.
1、定期做好檢測工作在實施自動焊 接機設備的內部或外部等接頭端子檢查時，必須把入力電源開關關閉后才可施行。比如查看自動焊 接機設備的通電情況時，看冷卻風扇的旋轉是否平順，在運行過程中是否有異常的振動、聲音和氣味發生，氣體是否有漏泄，電焊線的接頭及絕緣的包扎是否有松懈或剝落，焊 接的電纜線及各接線部位是否有異常的發熱現象等。
1. The inspection work should be done regularly. When inspecting the internal or external terminals of the automatic welding machine, the power switch must be turned off before the inspection can be carried out. For example, when checking the power on of automatic welding machine equipment, check whether the cooling fan rotates smoothly, whether there is abnormal vibration, sound and smell in the process of operation, whether there is gas leakage, whether the joints of welding wire and insulation are loose or peeled off, whether there is abnormal heating phenomenon in the welding cable and various wiring parts, etc.
2. Whether the contact is good or not, due to the forced air cooling of automatic welding machine equipment, it is easy to inhale dust from around and accumulate in the machine. If the frequency of use is high, it is recommended to absorb the internal dust with the assistance of some dust removal equipment to ensure the internal cleanliness, especially after the transformer or coils at all levels are polluted, the poor contact may occur. When wiping, special attention should be paid to the slow wiping of the gap part, and the main wiring parts and terminals should be checked regularly to see if the screws are loose, In case of rust, remove the rust to ensure good conductivity.
3、定期換損耗件正規自動焊 接機設備長期的使用也難免會使外殼因碰接而變形，生銹而受損傷，內部零件也會消磨，因此在年度的保養和檢查時要實施不 好品零件的更換和外殼修補及絕緣劣化部位的補強等綜合修補工作，不好品零件的更換在做保養時應全部一次更換新品，以確保自動焊 接機設備的性能長期穩定。
3. Regular replacement of wear and tear parts, regular automatic welding machine equipment, long-term use will inevitably make the shell due to contact deformation, rust and damage, internal parts will also wear away, so in the annual maintenance and inspection to implement improper maintenance In order to ensure the long-term stability of the performance of the automatic welding machine, the replacement of good parts, the repair of the shell and the reinforcement of the insulation deterioration parts, and the replacement of bad parts should be replaced with new products at one time.
隨著自動焊 接機設備的使用范圍越來越廣，此種高科技設備技術等更新，促使焊 接機的使用越來越普遍，甚至有許多焊 接機設備根據行業的特點開發出了一些特制型焊 接產品，從此角度來說正是因為焊 接機設備優良的工作表現才引得各廠家不斷更新和改進。
With the use of automatic welding machine equipment more and more widely, this kind of high-tech equipment technology update, promote the use of welding machine more and more common, and even many welding machine equipment according to the characteristics of the industry developed some special welding products, from this point of view, it is because of the excellent performance of welding machine equipment that the manufacturers constantly update and improve.